Sale 20% off roofing, siding & concrete — ends in 20d 00h 00m 00s See the details
Rock Solid Exteriors

Concrete

Concrete driveway replacement on Canterbury Drive, Sterling Heights, MI

Driveway replacement on Canterbury Drive in Sterling Heights, MI: old slab out, new concrete with a saw-cut joint grid. Completed June 2022.

← All projects
New concrete driveway with a grid of saw-cut joints leading to an attached two-car garage with a dark brown door on Canterbury Drive in Sterling Heights, MI
Replaced concrete driveway on Canterbury Drive in Sterling Heights, Michigan, completed in June 2022.

About this project

This driveway on Canterbury Drive in Sterling Heights was torn out and replaced in June 2022. The new slab runs from the older concrete near the street up to an attached two-car garage. It took about six weeks from the signed contract to the finished pour.

In the photo the new concrete is clearly lighter than the weathered slab along the bottom edge, which has a rougher, stony surface. Saw-cut joints divide the driveway into a grid of panels. Yellow caution tape along the lawn kept people off while it cured, and brick piers frame the dark brown garage door.

What we did

  • Removed the old driveway between the existing concrete and the garage
  • Poured a new driveway to the full width of the two-car garage
  • Saw-cut control joints in an even grid
  • Finished the new slab against the older concrete near the street
  • Taped off the lawn edge while the concrete cured

Where the new driveway meets the old concrete

Most driveway jobs stop at a line. A city walk or an apron may stay, and the new slab has to meet it cleanly. Done right, there is a clean break along that line so each piece can move on its own as the ground freezes and thaws, and a crack in one does not travel into the other. You can see that line across the bottom of this photo.

The grid of saw cuts does a similar job inside the new slab. Concrete shrinks as it cures and keeps moving with the seasons. Cutting joints early, while the slab is still young, means cracks tend to follow those straight lines instead of wandering across the middle of a panel.

Questions homeowners ask about driveway replacement

Why are some driveway joints sawed instead of tooled?

Both methods work. Tooled joints are pressed into the concrete while it is wet. Saw cuts are made with a blade once the surface can take it, and they leave a thin, straight line. On a wide driveway like this one, saw cuts make it easy to keep a grid straight across several panels.

What happens on the day the old driveway comes out?

The old slab is broken up and hauled away, the base is checked and prepared, and forms are set for the new pour. You will not be able to park in the garage until the new concrete can carry a car, so plan where your vehicles will go. We give you that timing for your job before work starts.

Do you work in Sterling Heights?

Yes. Sterling Heights borders Clinton Township, where our office is. We have completed more than 145 jobs in the city, more than 25 of them concrete. See our concrete work in Sterling Heights.

See more of our driveway replacement and concrete in Sterling Heights, or call (844) 757-6543 for a free estimate.

Nearby projects

See every project on the map